When you search a county's property records, the site you land on often wasn't built by the county. It may be a vendor's platform with the county's name at the top, or a state agency's database that covers every county at once. The platform decides how the search works: whether to type the owner's last name first, whether a partial name matches, which tax years appear, and what the official page looks like.

We traced the property search links in our directory to the platforms behind them. The directory covers 3,144 counties and county equivalents, and 2,729 of them have an online property search link in the August 1, 2026 edition. Then we loaded sample portals from the larger platforms to see how their searches behave.

The short answer

  • Vendors run a large share of county property searches. We could name the vendor for 1,235 of the 2,729 search links (45.3%). The real share is higher, because many county-branded sites run vendor software we can't see from the address.
  • One company leads. Schneider Geospatial's qPublic.net, Beacon and Spatialest sites serve 378 counties in 24 states, or 13.9% of all search links. In Georgia, 143 of 159 counties use them.
  • Three vendors cover almost a quarter of the counties. Schneider, BIS Consultants and Vanguard Appraisals account for 639 search links (23.4%). The top five reach 822 (30.1%).
  • Four states send most counties to a single state-run search. These are Tennessee, Maryland, Montana and West Virginia. Vermont's records also point to one statewide parcel map.
  • A .gov address is the exception. Only 738 of the 2,729 search links (27.0%) end in .gov or .us, so a commercial-looking address does not mean the site is unofficial.
  • Each platform has its own search rules. Delta's Mississippi sites want the last name first. Vision's sites match part of a name. DEVNET mixes in old tax years. The details are below.

How we measured

We took the property search, tax payment and GIS map link for each record in our directory and pulled out the hostname. We named a vendor only when either of these was true:

  • The hostname belongs to the vendor, such as tylertech.com, bsaonline.com or deltacomputersystems.com.
  • The portal names the company itself, such as "Assessor Hub provided by Vanguard Appraisals, Inc" or "Copyright 2026 Aumentum Technologies" in the footer.

For Schneider, we also used the company's own history page. It says Schneider launched its first Beacon site in 1998 and acquired qPublic in 2014 (opens in a new tab). A company announcement dated August 8, 2023 (opens in a new tab) covers its purchase of Spatialest.

Texas appraisal districts often run vendor software on their own domains. For those we reused the vendor footers checked for our Texas appraisal district search guide.

The rest of the links fall into three groups:

  • State-run portals: one state agency hostname serving many counties.
  • Government domains: county and city .gov or .us addresses.
  • Other domains: addresses that are neither of the above, including shared platforms whose owner we could not confirm.

A hostname shows who hosts the page, not who wrote the software. A county can run a vendor's product on its own domain, and we count that as county-hosted.

Who runs the property search: the national picture

Platform behind the search linkCountiesShare of 2,729 linksWhere
Schneider Geospatial (qPublic.net, Beacon, Spatialest)37813.9%24 states; Georgia 143, Kentucky 54, South Carolina 28
BIS Consultants (eSearch)1344.9%Texas
Vanguard Appraisals (Assessor Hub sites)1274.7%Missouri 44, Iowa 29, North Dakota 27, four other states
actDataScout1164.3%Arkansas 53, Oklahoma 32, Louisiana 15, Pennsylvania 8, Virginia 8
Pritchard & Abbott672.5%Texas
gWorks612.2%Nebraska
BS&A Software (bsaonline.com)451.6%Michigan
DEVNET (wEdge)401.5%Illinois 20, Missouri 10, three other states
Tyler Technologies (Tyler-hosted addresses)311.1%9 states, mostly Wyoming, Colorado, North Dakota
Delta Computer Systems311.1%Mississippi
16 smaller named vendors2057.5%Including Aumentum, Vision, Tri-State Consulting, ParcelQuest, Catalis
All named vendors1,23545.3%26 vendors
State-run portals1947.1%Mostly Tennessee, West Virginia, Montana, Maryland, Vermont
County or city government domain54219.9%Every region
Other domains (vendor not confirmed)75827.8%Includes 297 links on shared platforms we could not attribute

The 16 smaller vendors are Aumentum Technologies (23), Vision Government Solutions (23), Tri-State Consulting Services (22), ParcelQuest (20), Catalis LandNav (19), Esri ArcGIS Online (18), Black Mountain Software (17), Southwest Data Solutions (14), Concise Systems (11), Megabyte (9), GAR Associates (9), MIPS (7), interactiveGIS (6), FetchGIS (5), Colligo GIS (1) and Harris Govern (1).

Another 415 records (13.2% of the 3,144) list no online property search. The largest gaps are in Indiana (74 counties), Illinois (55), Kansas (35), Idaho (34) and Kentucky (33). In Maine and Connecticut, where towns rather than counties assess property, no county record lists one.

The 2,729 links use 1,694 different hostnames. Two hostnames carry more than a hundred counties each: qpublic.net (184) and beacon.schneidercorp.com (107). At the other end, 1,627 hostnames serve just one county each.

How much is really vendor software

The 45.3% figure is a floor. Two examples show what the hostname count misses:

  • 35 county-hosted search pages use the address pattern search/commonsearch.aspx. In Anoka County, Minnesota, that page's footer reads "Powered by iasWorld Public Access," which is Tyler's assessment product.
  • 23 more county-hosted links use Tyler's EagleWeb layout (/assessor/web/). It looks the same as the EagleWeb pages Tyler hosts itself, which carry a "Tyler Technologies, Inc." copyright.

We left all of these in the county bucket because the brand on the page is the county's. Still, they suggest a single vendor is behind more county sites than its own domains show.

Where one platform dominates a state

Inside many states, one platform covers most counties:

StateLeading platform for property searchCountiesShare of state
MarylandState Department of Assessments and Taxation (SDAT)23 of 2495.8%
GeorgiaSchneider (qPublic.net)143 of 15989.9%
TennesseeComptroller's Tennessee Property Assessment Data (TPAD)83 of 9587.4%
ArkansasactDataScout53 of 7570.7%
NebraskagWorks61 of 9365.6%
South CarolinaSchneider28 of 4660.9%
West VirginiaState MapWV assessment search31 of 5556.4%
MichiganBS&A Software45 of 8354.2%
MontanaMontana Department of Revenue (Property.MT.gov)30 of 5653.6%
TexasBIS Consultants (eSearch)134 of 25452.8%
North DakotaVanguard Appraisals27 of 5350.9%
KentuckySchneider54 of 12045.0%
MississippiDelta Computer Systems31 of 8237.8%

Other states have no leading platform. In Ohio, Pennsylvania, North Carolina and Virginia, the most common vendor covers 13% of counties or less. There, most offices run their own sites or use vendors we could not identify from the address.

The statewide portals

Tennessee, Maryland, Montana and West Virginia each run one state search that covers most or all of their counties. Vermont's records point to a statewide map instead.

  • Tennessee: The Comptroller's Tennessee Property Assessment Data (opens in a new tab) site says it has data "from county Assessors of Property in 86 of Tennessee's 95 counties." The rest, including Davidson, Hamilton, Knox, Shelby and Williamson, link out to their own assessors. Pick the county from the list before searching.
  • Maryland: The State Department of Assessments and Taxation (opens in a new tab) handles assessment for every county and Baltimore City, so one Real Property search covers the state.
  • Montana: The Department of Revenue's property search (opens in a new tab) takes an address, assessment code, name or property number in one box. Picking a county speeds it up. Fifty of Montana's 56 county records also use the state's cadastral map as their GIS link.
  • West Virginia: The MapWV assessment search (opens in a new tab) lists all 55 counties, with an "All" option, and has tabs for Basic, Appraisal/Sales, Advanced and Prior Ownership searches. 31 counties point to it, and the others link to their own assessor sites.
  • Vermont: Property is assessed by towns. Our 14 county records point to the Vermont Parcel Viewer (opens in a new tab), which is run by the Vermont Center for Geographic Information. It joins town parcel maps to the Grand List from the Department of Taxes. Its current data is linked to the 2025 Grand List, so it can be a year behind the town's own records.

Search, map and payment: same platform or not

Our earlier study of county portals showed how often the search, map and payment tools sit on different websites. The platform view explains much of that split:

  • Search and map: Of the 2,440 counties with both a search and a GIS link, 934 (38.3%) use the same hostname for both. Bundled platforms keep them together:
    • gWorks counties use the gWorks map in 60 of 61 cases.
    • Schneider counties use a Schneider map in 233 of 378.
    • BIS counties use the BIS map viewer in 98 of 134.
    • None of the 45 BS&A counties in Michigan has its map on bsaonline.com. Where a map is listed, it runs on FetchGIS, Esri, Colligo or a county server.
  • Search and payment: Only 472 of 2,567 counties (18.4%) list a tax payment link on the same host as the property search. Payment usually belongs to a separate treasurer or collector, often through a separate payment processor.
  • Maps on Esri: Esri's ArcGIS Online hosts the GIS link for 373 of the 2,527 counties with a map (14.8%), across 44 states. That is the largest single map host. Many more county maps run Esri software on county-owned servers, which this count does not include.

In practice, finding the parcel on the search site does not mean you can pay there. Carry the parcel number to the collector's site, as covered in our guides to using a parcel number and paying property taxes online.

How to search the major platforms

We loaded sample portals from each of the platforms below and, where the site allowed it, ran the same owner searches on each. Several vendor sites block automated traffic, so some notes come from each search page's own instructions rather than test results.

Schneider Geospatial: qPublic.net and Beacon

The address shows qpublic.net/<state>/<county>, or beacon.schneidercorp.com or qpublic.schneidercorp.com with the county named in the App= part. Spatialest sites (property.spatialest.com) belong to the same company.

  • You must click Agree on the county's terms before the search opens.
  • There are separate boxes for owner, address and parcel. Each has an "Exact name match?" or "Exact match?" checkbox. Leave it unchecked if you aren't sure how the owner is spelled on the roll.
  • Suggestions appear as you type. Pressing Search returns every match on a separate page.
  • The address box accepts a range of house numbers, for example "1200-1299 Main," which helps on rural routes or when you only know the block.
  • Check the "Last Data Upload" time in the footer. A sale from last week may not be loaded yet.
  • The sites use a security service that blocked our automated searches. If you ever see a "you have been blocked" page, wait and try again in a normal browser window.

Examples: Alamosa County, CO (qPublic), Winnebago County, IA (Beacon) and Dixie County, FL (qpublic.net).

Vanguard Appraisals: Assessor Hub sites

The address has the pattern <county>.iowaassessors.com, with the same naming for Missouri, North Dakota, Minnesota, Nebraska and Illinois. South Dakota uses southdakotadirectors.com. Every page header says "Assessor Hub provided by Vanguard Appraisals, Inc."

  • Click "Yes, I Agree" on the disclaimer first.
  • There is no box labeled "Owner." Use Deed Holder, and try Contract Buyer if the home was bought on contract.
  • The parcel number field accepts % as a wildcard, which helps when you know only part of a PIN.
  • Some counties have separate Sale and Building searches, useful for finding comparable sales.

Example: Adair County, Iowa.

DEVNET wEdge

The address looks like <county><state>.devnetwedge.com, mostly in Illinois and Missouri. In our tests on the Adams County, Illinois site:

  • "SMITH JOHN" and "JOHN SMITH" returned the same owners, so word order didn't matter.
  • A partial name ("SMI") matched every Smith.
  • The results mixed in records from the 2000s next to 2025, so read the Year column before you trust a value or balance. The form has a "Search All Tax Years" box and a tax-year range.
  • The site's own hint suggests searching by parcel number or by last name as it appears on the tax bill.

Delta Computer Systems (Mississippi)

The address is deltacomputersystems.com/MS/<county code>/. The search does not filter. It jumps to a place in an alphabetical list.

  • In Adams County, "SMITH JOHN" landed on the right owners.
  • "JOHN SMITH" landed among owners named Johnese and Johnson. The form says "Name (last first)" for this reason.
  • The header shows which tax year you're seeing and when records were last updated. Check both before relying on a "taxes due" column.

Vision Government Solutions

The address is gis.vgsi.com/<town or county>, common in Virginia, Pennsylvania and New England towns. Pick Address, Owner, Account, Mblu or PID from the menu.

  • In owner mode the prompt says "Enter an Owner (last name)."
  • In Nantucket, "SMITH J" returned two Smiths and also "GOLDSMITH J SPENCER." The match can fall inside a name, so check each result.
  • "JOHN SMITH" returned no data at all. Always type the last name first here.

Tyler Technologies: EagleWeb, iTax and iasWorld

Tyler-hosted pages use tylerhost.net, tylertech.com or tylerapp.com. Many counties run the same software on their own domain.

  • EagleWeb (common in Colorado, New Mexico and Arizona) opens with an "Enter EagleWeb" button. See Yuma County, AZ.
  • iTax (Montana, Wyoming, North Dakota) asks you to use one search criterion at a time. Its owner example is "Jones Steve or Jones," last name first. See Big Horn County, MT.
  • iasWorld Public Access sites use a commonsearch.aspx address and start with a disclaimer to accept. Anoka County's basic search takes a parcel ID ("You do not need to enter the dashes") or parts of an address, and shows a "Data Current as of" date. Other search types sit on separate tabs, including Advanced Search.

gWorks, actDataScout, Aumentum and others

  • gWorks (Nebraska) starts on a map with one search box for address, owner, parcel ID or section-township-range (STR). The page shows a "Site Last Updated" date.
  • actDataScout (Arkansas, Oklahoma, Louisiana) blocked our automated checks, so we could not test it. Its addresses follow actdatascout.com/RealProperty/<State>/<County>. Confirm that the state and county in the address match the parcel.
  • Aumentum sites (<county>.publicaccessnow.com) differ by county. The Kenai Peninsula Borough site says its valuation records "are updated only once a year" and that it shows one owner record per parcel. It's a good reminder that a portal can show only some of the owners.

How to tell the official site from a look-alike

Because 73% of official search links are not on a .gov or .us address, the domain alone won't tell you whether a site is official. These signs are more reliable:

  • The county or district runs the page. Official vendor portals show the assessing office's name, address, phone number and its own disclaimer, as on every Vanguard, DEVNET and Schneider page we loaded.
  • The address names one county. Vendor portals put the county in the subdomain or path (adair.iowaassessors.com, App=AlamosaCountyCO). A site that covers every state from one search box is a data reseller, not the county's record system.
  • Basic searches are free. On every official portal we loaded, a basic parcel lookup cost nothing. Some offer paid extras such as subscriptions or data downloads. Be wary of any site that asks you to pay before it shows the owner or value.
  • The site states how current the data is. Official portals usually show a last-updated date or certified-roll notice. Data copied to third-party sites may lag behind.
  • You got there from an official link. The safest route is the link on the county's own website or the matching link in our directory. Each county page lists the property search, tax collector and GIS map we found for that county.
  1. Check which platform you're on from the address or footer, then follow that platform's rules. Last name first is the safe default.
  2. Start broad. Use a last name or street name alone, then narrow down. Exact-match boxes and full first names often hide records stored as initials, trusts or "ETAL."
  3. Read the year and the "as of" date on every result before relying on a value or balance.
  4. Use the parcel number to move between sites. Copy it from the search platform to the map and the payment site, since these are often run by different companies.
  5. Find the state portal first in Tennessee, Maryland, Montana and West Virginia.

Limits of this analysis

We classified links as they stand in the August 1, 2026 dataset edition. Vendors win and lose county contracts, so individual counties can move between platforms during the year.

  • We named a vendor only when the address or the page itself showed it. 297 links sit on shared platforms whose operator we could not confirm, so they stay in the "other" group.
  • Counties running vendor software on their own domains are counted as county-hosted.
  • Search behavior can differ between counties on the same platform, because counties configure their own fields.
  • Our tests used one sample county per platform.

Read our sources and editorial methodology for how the directory is maintained, or find your county to open its official links.